إزالة الشعر بالليزر

This is an amazing treatment for unwanted hair. Shaving every day is a thing of the past. This treatment delivers 99% hair reduction. Our device is good for all skin types and all skin tones also treating a range of thin to coarse hair, leaving skin smooth and silky. Hair removal can be performed on any part of the body with hair.

How Diode Laser works?

آلة إزالة الشعر بالليزر ديود مبتكرة من الناحية الفنية, مع الياقوت لتجميد الرأس إلى درجة حرارة سلبية لتحسين حماية الجلد وتحسين راحة العلاج. بثلاثة أطوال موجية, يتم امتصاص الميلانين في بصيلات الشعر بواسطة ليزر بطول موجي محدد, والتبادل الحراري يدمر بصيلات الشعر. يمكن حقن طاقة الليزر لأسفل في بصيلات الشعر, تدمير تحلل الطاقة, يتسبب في توقف بصيلات الشعر عن النمو لإزالة الشعر بشكل دائم وإخراجها من خلال عملية التمثيل الغذائي دون الإضرار ببصيلات الشعر. الأوعية الدموية والأعصاب. The machine is equipped with two TEC condenser to protect the machine for a long service life.

Hair removal machine display

• Ease of Use

Look at the machine that you are purchasing to see if the operating interface is easy to use. There are several different systems across different machines some of which are better than others. In some cases you have to input treatment parameters from tables and this can be cumbersome and make it possible for you, or your staff, to make mistakes resulting in bad clinical outcomes.

• Integrated Cooling

For a diode laser hair removal machine, the ability to cool the skin during hair reduction therapy is critical to minimizing the potential for pain, احمرار, burns and hyper/hypo-pigmentation. That is because the deeper the target tissue the more time it takes the heat to dissipate. نتيجة ل, if insufficient time is allowed for the heat to dissipate between shots you can very easily build up temperature with each successive shot. So much so that the laser beam that would normally not cause any adverse effects now becomes the straw that breaks the camel’s back. Hence the ability to cool the skin rapidly dissipates this latent heat and minimizes the chances of adverse effects due to overheating.

By far the most effective system for cooling is Integrated Contact Cooling (ICC). While there are several ways of producing ICC it is essential that your laser machine has such a system. Any other method (such as air or chilled gel) is simply not effective.