IVYPLUS 600S
808nm Diode Laser Hair Removal System
IVYPLUS 600S is the most classic diode laser hair removal systems, which received tens of thousands of good rewards over the past ten years.
Manipoli
- 17mm*10mm or 11mm*11mm spots size for optional.
- The skin contact head of the handpiece is made of pure copper, which is conducive to better cooling the skin
-
Use two pieces of TEC to keep skin surface cooling at freezing point
- Powerful energy density from 0-120J/cm2 per shots. 4-6 treatments for permenant hair removal
- Face tip available for small area
Interfaccia
- Modalità FC： intelligent hair removal mode. only need to choose the skin type, gender and body area. then the smart system will suggest a proper treatment parameter automatically.
- FHR mode: There are five pre-set treatment parameters, which are convenient to start treatment quickly
- Skin rejuvenation mode: The skin rejuvenation treatment interface is divided into effective，standerd and soft grades. Durante il trattamento, you can choose according to the customer’s acceptance.
Stable operation and low maintenance cost
- The cooling water circulation system of the whole machine uses a 600W Freon compressor to ensure that the machine can run stably for 7*24 ore.
- The laser bar is made of USA. And also mounting with Micro channel cooler from Germany. Laser life expectancy is very long-lasting up to 50 milioni di colpi.
Specifica：
| Elementi | Dettagli | Suppllier/Character |
| Parte principale | ||
| Copricapo | ||
| Pila laser a diodi | Micro channel laser same as alma soprano | Germania |
| Laser a diodi | Confezione sigillata con riempimento di azoto | Oriental-laser |
| Barra laser | 100W per barra da Coherent | Coerente, Stati Uniti d'America |
| Testa di copricapo | 17mm*10mm or 11mm*11mm optional. Punta facciale opzionale. | Oriental-laser |
| Punta facciale | All spot size matched and also fitted with Original Soprano ice handpiece | Oriental-laser |
| Connettore per copricapo | Il nuovissimo K- model easy installaltion connector, which is connect headpiece with machine body. | Cina |
| Skin cooling head on headpiece | ||
| Zaffiro | Vero zaffiro con eccellente trasmissione della luce e trasferimento di calore. Not quartz not glass. | Cina |
| Peltier | 2pcs Thermoelectric cooler keep skin temperature below -5–0°C | Cina |
| Sistema di raffreddamento ad acqua | ||
| Compressore freon | Water cooling system for whole machine. usa R134a | Hitachi, Giappone |
| Pompa dell'acqua | 5pompe da 40 W con 0,5 MPA | China taiwan province |
| Filtro PP | 5uno, For removing particals in water | Oriental-laser |
| Sostituzione filtro resina | Per mantenere gli isolanti dell'acqua | Oriental-laser |
| Regolatore di temperatura | For controling the compressor | China taiwan province |
| Interfaccia & Sistema di controllo | ||
| Touch screen | 10.4 pollici touch screen digitale a colori reali | Dwin China |
| Pannello di controllo | Single chip | Gigadispositivo |
| Controllo delle pulsazioni | Pedaliera medica | Cina |
| Sensore di flusso d'acqua | For whole system cooling water | Cina |
| Termometro | For whole system cooling water | Cina |
| Sistema di alimentazione | ||
| Alimentazione elettrica 1 | 1000W For handpiece | Meanwell, China taiwan province |
| Alimentazione elettrica 2 | 300W for Water pump | Meanwell, China taiwan province |
| Alimentazione elettrica 3 | 150W For control board and touch screen | Meanwell, China taiwan province |
| Specifica | ||
| Densità di potenza massima per colpo | 120J/cm2 | / |
| Dimensione del punto | 17mm*10mm or 11mm*11mm optional. Punta facciale opzionale. | / |
| Larghezza di impulso | 10-500SM | / |
| Pulse ferquency | 1-10Hz | / |
| Lunghezza d'onda | 808nm or 808+755+1064nm trio upon request | / |
| Potenza laser | 600W | / |
| Interfaccia intelligente | Modalità FC (with subtotal fuction） | / |
| FHR Stack mode | / | |
| skin rejuvenation mode | / | |
| Ingresso elettrico | 200-240/100-110VAC, 50/60Hz o 100-110V su richiesta | / |
| Dimensioni macchina | 52cm larg * 52cm P*125 cm H | / |
| Peso della macchina | 78kg | / |
| Dimensioni scatola | 70*64*132 | / |
| Peso del volume della scatola | 119kg | / |
| Elementi | Dettagli | Suppllier/Character |
